1. Control unit: Industry Canada (IC)
C.R.C.C. 1374 (Radio Interference Regulation) ICES-003 (interference-causing Equipment Standards) 3. Nature of control: mandatory
4. Regulatory method: accept the Grant of FCC; 5. Both English and French must be marked on the Label or in Manual
2. Product range
These include office machines, electronic toys, televisions, personal computers, CD players, photocopiers, radios, fax machines, video game consoles, etc.
IC certification standards are basically the same as the FCC, IC currently only limits on electromagnetic interference
The certification process
1. The manufacturer or agent makes a preliminary oral or written application to our company
2. The applicant shall fill in the application form, send the application form, product instructions and technical documents to us, and provide a prototype if necessary
3. Our company makes plans and offers
4. The applicant confirms the quotation and signs the quotation back, and sends the samples and relevant technical documents to our company
5. Technical documents provided by the applicant
6. Our company will issue a charge notice to the applicant, and the applicant will prepay the certification fee according to the charge notice
7. Our company reviews technical documents and organizes IC certification activities
8. If the technical documents are not perfect or the specified language is not used, our company will inform the applicant to improve
9. If the test is not qualified, our company will timely inform the applicant and decide whether to suspend the project, allowing the applicant to improve the product. The applicant shall change the technical data in the original application to reflect the actual situation after the change
10. For the rectification costs involved, our company will issue a notice of supplementary charges to the applicant
11. The applicant shall pay the rectification fee according to the supplementary fee notice
12. We provide the applicant with test report or technical documents and certificates
In addition, the above process is IC certification, if you want to apply for IC ID certification, the IC ID certification process in addition to the same as the above process but also more than this: test report and data submitted to FCB/TCB agency for review.
The certification period is usually 2-4 weeks and materials are required to be submitted
IC certification
1. The application form
2. Equipment model technical specification or technical manual, internal high working frequency of the product, circuit schematic diagram and operation manual.
3. The label
IC ID certification
1. The application form
2.IC ID number (14 more bits, CN (company code + product code 8 bits)
3. Letter of authorization from local agent
4. Block diagram: all crystal vibration frequencies should be drawn and consistent with the circuit diagram.
5. Circuit diagram
6. Circuit description: the requirements are in English, and the function realization principle of the product is clearly described
7. Operating instructions
8. Test report
9. The label of each model (IC cannot be applied for) and the label position. The label shall have the IC ID code and the label position requirement.
10. Internal photos and external photos of the product: the pictures should be clear and clear, and remarks should be added when necessary
11. Test photos
12. Technical specification (including transmission frequency, channel rate, transmission power, modulation mode, etc.)
IC ID application notes
1. The address of the representative of Canada must be available.
2. The label shall contain the following information:
1. Manufacturer's name or trademark
2. Model name
IC ID number