NOM (Normas Oficiales Mexicanas) logo is a mandatory safety symbol for Mexico
Chi, used to indicate that the product meets the relevant NOM criteria. NOM applies to most products, including electricity
Information and information technology equipment, household electrical supplies, lamps and other products with potential health and safety risks
Product. Products, whether made in Mexico or imported, must comply with the relevant NOM standards and products
Labeling requirements. NOM certification is primarily a certification requirement for the security part.
Under Mexican law, NOM must be certified by a Mexican company for the quality of the product,
Responsible for maintenance and reliability. The test report is issued by a laboratory approved by SECOFI, SECOFI, ANCE or
NYCE audit and issue to the Mexican representative of the manufacturer or exporter if the product meets the relevant regulatory requirements
Issue a certificate, the product can be marked NOM.
Mexico has two verification units available for NOM Mark
-NOM NYCE: validation covers all electronic and information products and data processing equipment except household appliances (except microwave ovens)
-NOM ANCE: the scope of verification covers all appliances and similar products (e.g. household appliances)
- not applicable to IEC standard, applicable to NOM standard
- no EMC testing is required
2. Technical information
- the Mexican voltage is 127V / 60Hz
- the plug is the same as the American plug. One is ClassI with three connectors and the other is
ClassII with two headers. The plug will be tested with the device itself.
Third, the certificate
- the certificate is valid for one year and can be renewed annually
- when renewing the certificate, a product shall be randomly sampled from the market for delivery to the laboratory
test
- product packaging shall contain the following information: product name, brand name, model and NOM
The logo
Iv. Document requirements
- CB test report and certificate
- name, address and contact of the importer or distributor in Mexico
- test data, drawings, specifications and circuit diagrams
- Spanish label
- original user manual in Spanish
- additional documentation required for a sample importer or distributor
- a copy of the company's authorization letter - a copy of the company's uniform code
- authorization information (PowerofAttorney)
- legal acting official certificate
- letter paper printed with the company name
- photocopy of a registered company with proof of tax payment
Factory inspection
Don't need.
Test samples
One to three test samples (depending on the product).
Vii. Audit time
All documents are submitted 5~6 weeks after the NOM application is completed, the original certificate and report
Will be sent to the local agent in Mexico. The original company will receive a copy of the fax sent by the agent
Keep the original certificate and report as reference for future inspection.
Viii. Mutual recognition of north American certification
The Mexican government announced the new resolution in the August 17, 2010, official gazette
Identify the equality between the three NOM criteria of Mexico and their counterparts in the United States and Canada. Therefore, the
For the following electrical and electronic products imported from Mexico, as long as the north American certification mark is applied (e.g. : UL,
CSA, ETL, MET, etc.) can enter the Mexican market without applying for NOM certification.
